Urmet Yokis hub Guía De Puesta En Servicio Rápida página 10

Step 2: Register modules in YOKISHUB database
Repeat the following two steps for EVERY module to register (max. 10):
▶ Press symbol
on the YOKISHUB once.
▶ Then, within 30 seconds, press the "connect" button on the module.
▶ The YOKISHUB and module LEDs will flash once to confirm the registration.
Step 3: Create the radio bus between different receivers
▶ Press the "connect" button on module A (the LED on module A will start flashing).
▶ Within 30 seconds, press the "connect" button on module B: the Bus Radio connec-
tion between the two modules is established and the respective LEDs will stop flashing.
A
Led
Connect
1 touch
▶ Repeat the same operation between modules B and C and then, gradually, for all the
others.
IMPORTANT: see instruction booklets and YOKIS catalogue, "POSSIBLE CONNECTIONS"
paragraph for connections between modules.
10
URMET S.p.a., Via Bologna 188/C, 10154 Torino - Customer Service: +39 011 23 39 810
Export Dept. Phone: +39 011 24 00 250/256 - Fax: +39 011 24 00 296 - www.yokis.com
1 touch
B
Led
Connect
1 touch
DS1054-043C
Led
Connect
1 touch
C
ETC
Led
Connect
.