Useful Information - Urmet Yokis hub Guía De Puesta En Servicio Rápida

To disassociate the HOKISHUB from YnO:
1. Tap on the icon at the top right of the Home Page.
2. Tap on "Edit information" in the sidebar.
3. Tap on "Advanced Configurations" at the bottom of the page.
4. Tap on "Release your system".

Useful information:

How to reset the YOKISHUB
configuration
(Delete scenarios,
associations, programming, etc.)
▶ Enter learning mode by holding symbol
on the YOKISHUB pressed for
3 seconds. Press symbol
YOKISHUB 10 times. The two LEDs
will flash at the same time, indicating
that the configuration has been reset.
12
URMET S.p.a., Via Bologna 188/C, 10154 Torino - Customer Service: +39 011 23 39 810
Export Dept. Phone: +39 011 24 00 250/256 - Fax: +39 011 24 00 296 - www.yokis.com
on the
10 touches
DS1054-043C
Replace a module
▶ Delete the BUS connections on the
modules in the system:
• Press and hold the connect button
on each module for 3 seconds.
• The LED on module will flash twice
to confirm the deletion of the radio
connections.
▶ Reset the YOKISHUB configuration.
▶ Repeat the procedure starting from
Step 1.
▶ Close and restart
system on the application.
to update the