Basic Steps For Cleaning - Hoover SteamVac PowerMax Manual De Instrucciones

Storing your Carpet Cleaner
 Empty solution tank and rinse thoroughly.
 Place empty solution tank on carpet cleaner. Turn carpet cleaner ON. Squeeze trigger and push
carpet cleaner forward and back several times. This will clear any solution remaining inside the
cleaner.
 Empty recovery tank, rinse thoroughly and let air dry.
 Allow brushes and underside of carpet cleaner to air dry thoroughly before storing carpet
cleaner on a carpeted or wood surface.
Lubrication
The motor is equipped with bearings which contain sufficient lubrication for the life of the motor.
The addition of lubricant could cause damage. Do not add lubricant to motor bearings.
Service
To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Sales
and Service Center or Authorized Hoover Warranty Service Dealer (Depot) by:
 Checking the Service Section of Hoover on-line at www.hoover.com OR
 Checking the list of Sales and Service Centers provided with this cleaner OR
 Checking the Yellow Pages under "Vacuum Cleaners - Household" OR
 Calling 1-800-944-9200 for an automated referral of authorized service outlet locations
(U.S. only)
Do not send your cleaner to Hoover in North Canton for service; this will only result in delay.
If further assistance is needed, contact the Consumer Response Center, Phone: 330-499-9499.
In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone: 1-800-263-6376.
Always identify your cleaner by the complete model number when requesting information or order-
ing parts. (The model number appears on the back of the cleaner.)
Continued §
13