Oakley RADAR PACE Guia De Inicio Rapido página 14

TROUBLESHOOTING
PAIRING RADAR PACE WITH SMARTPHONE
• Ensure RADAR PACE is in pairing mode by pressing the power button twice quickly. The indicator light will flash dark blue.
• Pair only via the RADAR PACE app; do NOT pair via any other application on your phone.
PAIRING WITH EXTERNAL BLUETOOTH® SENSORS
• Pair only via the RADAR PACE app.
• Ensure the battery of the sensor device has enough charge to broadcast its signal to RADAR PACE.
• Some sensors require movement to begin broadcasting to the RADAR PACE app.
• Ensure the sensor device is not paired with another device; if it is currently paired with your phone, go to phone system settings and
unpair to ensure the device is discoverable.
• Refer to the owner's manual that came with your external sensor for more troubleshooting information.
PAIRING WITH EXTERNAL ANT+ SENSORS
• Ensure the battery of the sensor device has enough charge to broadcast its signal to RADAR PACE.
• Some sensors require movement to begin broadcasting to the RADAR PACE app.
• Refer to the user guide that came with your external sensor for more troubleshooting information.
CONNECTED SENSORS
• Ensure the sensor device is not currently paired with another device.
• Most connected sensors require movement to begin broadcasting to the RADAR PACE app.
RESETTING RADAR PACE
• To perform a Factory Reset and reboot RADAR PACE, hold the power button for more than 12 seconds. The indicator light will blink red.
• To perform a Factory Reset and power off RADAR PACE, hold the power button for more than 18 seconds. The indicator light will blink red.
14