Basic Operation; Technical Data - Philips PicoPix PPX1020 Manual Del Usuario

2 Basic Operation

EN
Packing Contents
Pocket Projector
USB Cable
Tripod
Pouch
User Manual
User Manual
Warranty Card
Missing Package Contents
Notice
Missing Package Contents
If one of the parts is missing or damaged,
please contact your retailer or our customer
service.
Installing the Software
1 Close all open programs and applications before
beginning the installation process.
2 Connect the Pocket Projector to an available USB
2.0 port.
3 Select PicoPix 1020 viewer as drive in the Win-
dows Explorer and start the program PicoPix
viewer Install.exe with a double-click.
4 Your computer will now prepare for the installation
process. Follow the instructions of the installation
wizard and restart the computer.
Notice
Disconnect the Device from the
Computer
Disconnect the device from the computer
before restarting. The computer may try
to boot from the Pocket Projector, which
was recognized as a USB storage medium.
Set up the Device
1 Connect the device to your computer on two USB
sockets by means of the Y-USB cable because the
current consumption is 1A.
2 Start the program PicoPix viewer. In the Statusbar
appears a symbol.
3 The Pocket Projector is switched on and projects
the image from the computer.
Notice
Screen Resolution of the Computer
The best picture quality can be reached, if
the screen resolution of the computer is
set to 800¦x¦600¦pixel.
4 Adjust the focus using the focus wheel.
6
5 Disconnect the USB cable from the computer if you
finish the presentation to save energy and exit
PicoPix viewer.
Notice
Exit the Program PicoPix viewer
1) Click on the PicoPix viewer symbol in
the Windows task bar using the right
mouse key.
2) Click on Exit.
Uninstalling the Software
1 Close all open programs and applications before
beginning the uninstall process. Load the uninstall
program by clicking on PicoPix viewer > Uninstall
PicoPix viewer in the Start menu. Your computer
will now prepare for the uninstall process.
2 Follow the instructions on the screen.
3 At the conclusion of the uninstall process you must
restart your computer.
4 After rebooting has occurred, removal of PicoPix
viewer from your computer will be complete.

Technical Data

Technology / Optical
Display technology.............................................0,37" LCoS
Light source............................................................RGB LED
Resolution...................................................... 800¦x¦600¦pixel
Supported Resolutions ....................SVGA/XGA/WXGA
Brightness (Bright Mode) .......................... up to 20¦lumen
Contrast ratio................................................................400:1
Projected image size......................................... 5,2¦–¦81¦inch
Screen distance........................................... 0,2¦m up to 3¦m
Horizontal Scan Rate ........................................ 31¦–¦69¦kHz
Vertical Scan Rate ................................................ 56¦–¦85¦Hz
Power Supply ....................................................via USB plug
Dimensions (L¦×¦H¦×¦W)............................88¦×¦25¦×¦88¦mm
Dimensions
Weight Weight.......................................................................... 0,15¦kg
Recommended Ambient Recommended Ambient........................................5¦–¦40¦ºC
Relative Humidity Relative Humidity.................. 20¦–¦80¦% (non-condensing)
Philips · PPX1020