Olympus WS-500M Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the recorder on
your PC
Operating environment
Windows:
Operating system:
Microsoft Windows 2000/XP/Vista
(Standard Installation)
Compatible PC's:
Windows PC's equipped with more
than one free USB port
Macintosh:
Operating system:
Mac OS X 10.2.8 -10.5 (Standard
Installation)
Compatible PC's:
Apple Macintosh series equipped
with more than one free USB port
Notes:
• This is an operational environment
for saving the fi les recorded by
this recorder to your PC with USB
connection.
• Even if operational environment is
satisfi ed, we do not support such
as upgraded OS, the multi-boot
environment and self-modifi ed PC's.
Connecting to your PC
1 Boot the PC.
2 Slide the USB connector slide lever
in the direction indicated by the
arrow to eject the USB connector
out of the recorder.
3 Connect to the PC's USB port or to a
USB hub.
Windows:
When you open [My Computer],
it will be recognized by the drive
name of the product name.
Macintosh:
When you connect the recorder
to a Mac OS, it will be recognized
by the drive name of the product
name on the desktop.
• [Remote] is appeared on
recorder if the USB cable is
connected.
Notes:
• Refer to the user's manual for your PC
regarding the USB port on your PC.
• Be sure to push the cable
connector all the way in.
10
EN
Otherwise, the recorder may not
operate properly.
• Use the supplied USB extension
cable depending on situations.
• Do not use USB extension cables
other than the supplied cable.
Using cables from other
manufacturers could result in
damage to the recorder. Do not
use the supplied USB extension
cable with devices from other
manufacturers.
• If you are using Windows 2000,
Windows Media Player must be
installed on the PC.
Disconnecting from your PC
Windows:
1 Click [
] on the task bar located
at the lower-right corner of the
screen. Click [Safely remove
USB Mass Storade Device].
• The drive letter will differ
depending on the PC being
used.
2 When the safe to remove hardware
window appears, click [OK].
3 Disconnect the recorder from the
PC.
Macintosh:
1 Move the drive icon for this recorder
that is appear on the desktop to the
garbage bin by Drag & Drop it.
• When you connect the recorder
to a Mac OS, it will be recognized
by the drive name of the product
name on the desktop.
2 Disconnect the recorder from the
PC.
Note:
• NEVER disconnect the USB while
the recording indicator light is
fl ashing. If you do, the data will be
destroyed.
Specifications
General points
Recording format:
WMA (Windows Media Audio)
Input level:
- 70 dBv
Sampling frequency:
[ST XQ] mode: 44.1 kHz
[ST HQ] mode: 44.1 kHz
[ST SP] mode: 22 kHz
[HQ] mode: 44.1 kHz
[SP] mode: 22 kHz
[LP] mode: 8 kHz
Frequency response:
During recording mode
(Microphone jack):
[ST XQ] mode: 50 Hz to 19 kHz
[ST HQ] mode: 50 Hz to 15 kHz
[ST SP] mode: 50 Hz to 9 kHz
[HQ] mode: 50 Hz to 13 kHz
[SP] mode: 50 Hz to 7 kHz
[LP] mode: 50 Hz to 3 kHz
During recording mode
(Built-in stereo microphone):
80 Hz to 20 kHz
During playback mode:
20 Hz to 20 kHz
Maximum working output:
60 mW (8 Ω speaker)
Recording medium:
Built-in NAND FLASH memory
WS-500M: 2 GB
WS-400S: 1 GB
Speaker:
Built-in ø 16 mm round dynamic
speaker
MIC jack:
ø 3.5 mm mini-jack, impedance
2 kΩ
EAR jack:
ø 3.5 mm mini-jack, impedance 8 Ω
or more
Input power requirement:
Batteries: AAA battery (LR03) or
Olympus Ni-MH rechargeable
battery
External dimensions:
94.8 mm × 38 mm × 11 mm
(without protrusions)
Weight:
46 g (including battery)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ws-400s

Tabla de contenido