Technical Service - Campbell Hausfeld PA212102 Manual De Instrucciones Y Lista De Repuestos

General Purpose Filter
Figure 2 Detail showing location of
flow direction arrow
Installation
(Continued)
4. Install the unit with the same pipe
size as the piping in use. Avoid
using unnecessary fittings,
couplings, etc., that restrict airflow.
Use PTFE tape on all threads.
MATerIAlS ThAT ATTACk POlyCArbOnATe PlASTIC (PArTIAl lISTInG)
Acetaldehyde
Acetic acid (concentrated)
Acetone
Acrylonitrile
Ammonia
Ammonium flouride
Ammonium hydroxide
Ammonium sulfide
Anaerobic adhesives & sealants
Antifreeze
Benzene
Benzoic acid
Benzyl alcohol
Brake fluids
Bromobenzene
Butyric acid
Carbolic acid
Carbon disulfide
Carbon tetrachloride
Caustic potash solution
Caustic soda solution
Chlorobenzene
www.chpower.com
5. Connect the air supply to the inlet
Flow
port.
direction
arrow
Operation
Before pressurizing system, make
certain the bowl is securely locked in
place by pushing it into the filter body
and turning clockwise to lock.
Maintenance
all pressure before
attempting to install,
service, relocate or perform
any maintenance on the air
system. Personal injury and/or
property damage could occur.
unit before removing the bowl.
Personal injury and/or property
damage could occur. If bowl is
difficult to remove, it may be
under pressure.
Chloroform
Cresol
Cyclohexanol
Cylohexanone
Cyclohexene
Dimethyl formamide
Dioxane
Ethane tetrachloride
Ethyl acetate
Ethyl ether
Ethylamine
Ethylene chlorohydrin
Ethylene dichloride
Ethylene glycol
Formic acid (concentrated)
Freon (refrig. & propell.)
Gasoline (high aromatic)
Hydrazine
Hydrochloric acid (concentrated)
Lacquer thinner
Methyl alcohol
Methylene chloride
1. Inspect and replace cracked,
2. Replace or clean filter element
3. Drain bowls at least once per work
Release
4. Before placing the unit in service,

Technical Service

For information regarding the
operation or repair of this product,
Always
depressurize the
please call 1-800-543-6400.
Methylene salicylate
Mike of lime (CaOH)
Nitric acid (concentrated)
Nitrobenzene
Nitrocellulose lacquer
Phenol
Phosphorous hydroxy chloride
Phosphorous trichloride
Phopionic acid
Pyridine
Sodium hydroxide
Sodium sulfide
Styrene
Sulfuric acid (concentrated)
Sulphural chloride
Tetrahydronaphthalene
Tiophene
Toluene
Turpentine
Xylene
Perchlorethylene and others
2
Model PA212102
damaged or deteriorated seals and
bowls. Wipe bowls with a soft, dry
cloth to clean.
periodically. Remove the filter
element and tap filter on a hard
surface or use an air gun to blow
out residual dirt.
shift. To avoid spray or splatter,
cover bottom of filter with a cloth
and turn the manual drain.
make sure the bowl is reinstalled
and securely locked in place.