Charging Up The Battery; Attaching / Detaching Attachments - nah-Vital Fresh Clean BM-330 Manual De Instrucciones

Charging Up the Battery

PLEASE NOTE!
• It is essential that you charge up the battery fully
before you fi rst use the device in order to achieve
the maximum charging capacity. If the battery is
fully discharged during use, it must be fully charged
up again before it is next used.
1
Plug the barrel connector of the mains adapter into the
connecting socket (4) on the charging station (5) and
then plug the mains adapter into a plug socket.
2
Place the device in the charging station. The operating
lamp (6) fl ashes while the battery is charging. If the
operating lamp is permanently lit, the battery is fully
charged.
3
First disconnect the mains adapter from the mains
power and then disconnect the barrel connector from the
charging station.

Attaching / Detaching Attachments

Attaching: Place the attachment you want on the head of the
main device (9). The magnets in the attachment and main
device fi x the attachment in place.
Detaching: Pull the attachment off the main device.
EN
29