nah-Vital Fresh Clean BM-330 Manual De Instrucciones página 33

3
To switch on the facial brush, press the
The operating lamp (6) will light up. When it is switched
on, the facial brush automatically operates on speed
setting 1. Press the
setting 2.
If the attachment is to rotate alternately right and left
during application, press the
attachment is only to rotate to the right again, press the
button again.
4
Move the facial brush over your face in circular
movements applying slight pressure and thus slowly
work the cleansing product into your skin.
The facial brush indicates intervals of approx. 18 – 20
seconds by quickly changing direction multiple times.
5
Press the
off the device. The operating lamp goes out.
6
Rinse your face with clear water if you have used a
cleansing product.
If you use it regularly, you should replace an attachment after
approx. 3 months as worn bristles can cause skin irritations. You
can order more attachments quickly and easily. You can obtain
a spare set containing four attachments under article number
03363 via the website: www.nah-vital.de
button again to apply speed
button several times if necessary to switch
button (8).
button (7). If the
EN
33