Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to Stop Your Pressure Washer
1.
Releasespray gun trigger and let engine idle for two
minutes.
2.
Move engine stop switch to "Off" position.
3.
ALWAYS point spray gun in a safe direction, push red
button and squeezespray gun trigger to releaseretained
high water pressure.
IMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
A, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
• Keephigh pressure hoseconnected to pumpand spraygun
whilesystemis pressurized.
• ALWAYSpointspraygun in safedirection,pressred button
andsqueeze sprayguntriggerto release highpressure, e very
time you stop engine.
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to
store your spray gun, nozzle extension and quick connect
spray tips. There is also a detachable hose wrap at the back
of the accessory tray to hold your high pressure hose.
1.
Place nozzle extension in clip on back of accessory tray.
How to Use PrecisionSpray
TM
Nozzle System
The quick-connect on the nozzle extension allows you to
switch between five different PrecisionSpray
TM
system
nozzles. PrecisionSprai Mnozzlescan be changed while
pressure washer is running once spray gun trigger lock is
engaged.
Follow these instructionsto changePrecisionSpray
TM
nozzles:
1.
Pull back collar on quick-connect and pull current
PrecisionSpray
TM
nozzle off. Store PrecisionSpray
TM
nozzles in holder provided on the accessory tray.
A, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
• NEVER exchange PrecisionSpray
TM
nozzles withoutthe trigger
lock beingengaged on the spraygun.
• DONOT twist PrecisionSpray
TM
nozzles whilespraying.
,
Select desired PrecisionSpray
TM
nozzle:
•
Select orange general PrecisionSpray
TM
nozzle for all
purpose cleaning. Cleansvinyl siding, brick patios,
concrete driveways and other surfaces.
GENERAL
Select red max PrecisionSpray
T M
nozzlefor maximum
cleaning. Greatfor cleaningstubborn stains, including
grease,tar, wax, and other hard to removestains.
O
MAX
2.
Place spray gun through hole on accessory tray on right
side of unit.
3.
Insert multi-colored PrecisionSpray
TM
nozzlesin spaces
provided in accessory tray.
4.
Wrap high pressure hose on hose wrap then attach hose
wrap to back of accessory tray.
5.
Hook provided on back of accessory tray for safely
storing safety goggles.
Select cyan jet flush PrecisionSprai Mnozzlefor
quick high flow clean up and long reach cleaning of
second story siding and windows.
JET FLUSH
13
Publicidad
Tabla de contenido
