Lanaform Eyes Massager Modo De Empleo página 23

• Push it a third time to switch to the HEATING + VIBRATING mode
• Push it a fourth time to switch to the AIR PRESSURE mode
• Push it a fi fth time to switch to the HEATING mode
• Push it a sixth time to switch to the VIBRATING mode
c) Heating button. When the HEATING command is selected, the button lets you adjust the intensity
of the heat. Each time you push the Heating button this will adjust the intensity of the heat for any
programme you have selected.
When you turn on the appliance and select the HEATING button, the heat is automatically on HIGH.
When the heat comes on, push the "HEATING" button. The heat will be adjusted as follows :
• When you push the button the fi rst time, the programme switches to medium heat.
• Push it a second time and the programme switches to low heat.
If you push it again, you will go back to HIGH heat.
d) Vibrating button. When the VIBRATING command is selected, the button lets you adjust the
intensity and frequency of the vibration for any programme you have selected.
By pushing the VIBRATING button, you can switch to diff erent modes as follows :
• When you select the Vibrating mode, the programme mode gives continuous vibration at high
intensity
• Push it once, and the programme switches to:
Continuous vibration; medium intensity
• Push it twice, and the programme switches to:
Continuous vibration; low intensity
• Push it three times, and the programme switches to:
Medium intensity with vibration alternating on the left and the right sides.
• Push it four times, and the programme switches to:
High intensity vibration alternating on and off at high speed.
• Push it fi ve times, and the programme switches to:
High intensity vibration alternating on and off at slow speed.
23