Insert The Battery; Charge The Battery - NETGEAR Fuse Manual De Instrucciones

Set Up Your Hotspot

Insert the Battery

1. Remove the back cover using the thumb
catch on the corner of the hotspot.
2. Align the battery's contacts with those inside
the battery compartment and gently press
down until the battery is seated.
3. Replace the back cover, pressing down
gently until the cover clicks into place.
6
All manuals and user guides at all-guides.com
Set Up Your Hotspot

Charge the Battery

1. Insert the USB cable into the charging adapter.
2. Insert the small end of the USB cable into
3. Plug the charging adapter into a standard
the micro-USB charging port at the bottom
of the hotspot.
AC power outlet.
visit devicehelp.boostmobile.com for guides, tutorials, and more
Get Ready
1. Make sure you are in an area covered by the
Boost Mobile network (not roaming).
2. Make sure the device you are trying to
connect to your Mobile Hotspot has its Wi-Fi
(wireless network connection) mode turned on.
7