Uniteck UNIFIX C100 Manual De Instrucciones página 13

ROOF-PASS FIXING (NOT INCLUDED)
• Drill through bulkhead using a hole saw. Diameter between 15 and 20mm.
• Clean the fixing area with a degreaser. Do not use alcohol/white spirit.
• Put glue on the indicated zone (in white on the image below), and place the roof-pass on the
drilled area.
2 glue threads
• Run the cables. Keep a sufficient length for wiring. Tighten the gland nuts to ensure a proper sealing.
www.uniteck.fr
EN
13/22