Safety Instructions - Uniteck UNIFIX C100 Manual De Instrucciones

Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
The UNIFIX C100, C150, C200 et C300 mounting bracket have been designed to be used on a flat
surface (ex.: campervan roof, houseboat).

SAFETY INSTRUCTIONS

• Take the appropriate measures to prevent accidents during your mounting steps.
• If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
• When finished, check and ensure that all of your brackets and panels are fixed properly.
UNIFIX - COMPOSITION
I
Provided elements
x2
For the mounting, make sure you have a damp cloth.
For the preparation of the surface before gluing the brackets: only use a slightly wet cloth
and the degreaser provided. Do not use alcohol/white spirit...
Respect 24 hours of drying time. Do not move or manipulate during this time.
Sika flex must be used at a temperature between 5°C and 35°C, the optimum application
temperature being between 15°C and 25°C.
x2
x2
www.uniteck.fr
EN
x12
9/22