Alcatel Onetouch V100 Guia De Inicio Rapido página 3

How to start your Dongle
1. Plug HDMI Port into TV's HDMI port; then plug micro USB port of USB
cable into V100's USB port, plug the standard USB port of this USB cable
into TV's USB port;
Tips:
a) Please follow above step connection port strictly, otherwise may cause
the UI can't be displayed;
b) If HDMI port can't plug into TV' HDMI port directly, please plug V100 into HDMI Adaptor then connect with
HDMI Cable, at last plug HDMI Cable into TV's HDMI port.
2. Waiting for TV display the main UI as below;
5. When you don't use it please disconnect on the mobile device follow below step: click "Setting" -> "Display" ->
"wireless display" -> "V100-****", choose "yes", TV picture will return main UI after 20 seconds.
3. Set your mobile device: click "Setting" -> "Display" -> "wireless
display" -> "search";
4. Please click "V100-****" item, then you can see the connection
status on the UI, press WPS key on the side of V100 or input pin code
on the mobile device according to tips on the UI. Seconds later you
can see the screen of mobile device display on the TV.
3