Publicidad
Idiomas disponibles
Idiomas disponibles
Step 19
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries can occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Place heaviest items in the lowest drawers
* Unless specifically designed to accomodate,
do not set TVs or other heavy objects
on the top of this product
* Never allow children to
climb or hang on drawers,
door, or shelves
* Never open more than one
drawer at a time
Use of tipover restraints may
only reduce, but not
eliminate the risk of tipover
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm)
through the safety bracket into the stud. Drive the screw through the safety bracket into the wall stud.
Tighten the screw that was not fully tighened in step 1.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move
your unit aside. Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole
until it is flush. Move your unit into location and fasten the wall bracket to the wall anchor with the
screw. Tighten the screw that was not fully tightened in step 1.
littleseedskids.com
13 c
13 d
x1
#A84050
27
For Masonry, Concrete, or
other wall materials:
Consult your local hardware
store for appropriate anchors to
securely attach the safety
bracket.
hole
13 d
13 c
stud
wallboard
Publicidad
