FOTILE SD2F-P1X Manual De Operación página 7

Fregadero lavavajillas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Put the clamp into the two overflow pipes, insert the shorter one into the drainage opening
of electrical lock tee for the functional sink, insert the longer one into the drainage opening
of the overflow seat - exhaust tee, and lock the clamp.
Step 4: Install the faucet and tee
1 1/16"
1. Install the faucet and fasten it.
2. Collect the tee at the angle valve of cold water.
Step 5: Clean and glue the countertop
1. Clean and install the countertop
2. Spray glass cement along the perimeter of
the mounting hole edges and ensure there is
a plenty and continuous supply.
Step 6: Place the sink dishwasher
1. Wear protective gloves and place the sink dishwasher into the opening.
Note: Do not lift or move the sink dishwasher by the faucet as this will cause damage and
possible water leakage.
-10-
1 1/8"
Step 7: Connect water pipes
1. Correctly connect the cold and hot water pipes of the faucet.
2. Connect the water inlet of the sink dishwasher and cold water valve tee, and screw it
down.
Note: Only cold water can be supplied to the water inlet of the dishwasher.
3. Open the angle valve and ensure there is no leakage at each joint.
Step 8: Connect power supply
1. Cut off power supply of the electrical box
2. Connect the power cable of the sink dishwasher and the cable in the electrical box, and
take the necessary insulation protection measures
Black wire to
Red wire to
black wire
red wire
Green wire to green
wire (ground wire)
Power wire
Note: The null line and live wire MUST be connected correctly and have a reliable ground.
Step 9: Install the drainer or waste disposer
Drainer:
1. Correctly install the drainer, connect with the drain hose of the sink dishwasher and
ensure tightness and no leakage.
Note:
If the pipeline needs to be shortened, cut C end, cutting length ≤2
If the pipeline needs to be lengthened, unscrew the thread of D end and pull it out, pull-out
distance ≤1
"
.
C≤2
"
D
Cuttable
Adjustable telescopic tuve
(Flexible to adjust length)
Junction box
Power wire
"
.
-11-

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Sd2f-p1xl

Tabla de contenido