Publicidad
1.4 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT
place jumper caps over these headers and connectors. Plac-
ing jumper caps over the headers and connectors will cause
permanent damage to the motherboard!
Serial ATA2 Connectors
(SATA_0:
see p.2, No. 6)
(SATA_1:
see p.2, No. 2)
USB 2.0 Headers
(9-pin USB4_5)
(see p.2, No. 20)
(9-pin USB6_7)
(see p.2, No. 7)
(4-pin USB8)
(see p.2, No. 3)
USB 3.0 Header
(19-pin USB3_0_1)
(see p.2, No. 9)
SATA_1
SATA_0
ASRock H61TM-ITX Motherboard
These two Serial ATA2
(SATA2) connectors sup-
port SATA data cables for
internal storage devices.
The current SATA2 interface
allows up to 3.0 Gb/s data
transfer rate.
Besides two default USB 2.0
ports on the I/O panel, there
are three USB 2.0 headers
and one USB port on this
motherboard. Each USB
2.0 header can support two
USB 2.0 ports.
Besides two default USB 3.0
ports on the I/O panel, there
is one USB 3.0 header on
this motherboard. The USB
3.0 header can support two
USB 2.0 ports.
11
Publicidad
