Klarstein SKYTOWER 360 SMART Manual Del Usuario página 30

EN
STRONG
High
Medium
Low
6S
MIDDLE
High
Medium
Low
6S
WEAK
High
Medium
Low
6S
30
Selecting wind mode
After switching on the appliance, press the wind mode button
the desired mode. Pressing the wind mode button
modes in the following order:
Normal wind > Natural wind > Sleep wind > Normal wind.
The corresponding indicator lights up.
Normal wind:
In normal wind mode, the appliance runs at the set speed level (Low, Medium or High)
without any changes.
Natural wind:
The wind diagram of this mode is shown in the figure below:
6S 6S 3S 6S
6S 12S 6S 3S
6S 6S 3S 12S
In natural wind mode, the corresponding indicator (7) lights up. The screen only shows
the original wind speed, changes are not displayed. This means that if, for example, the
natural wind mode with high speed has been activated, only the speed level „High"
(„3") is displayed without changing.
12S 6S 6S 6S
6S 6S 6S 6S
12S 3S 6S
several times to set
several times cycles through the
6S 6S 3S 12S
6S 6S 3S 6S 6S
15S 3S 6S 6S
6S
T=90S
6S
T=90S
6S
T=90S