INSTA L L ATIO N INSTRU CTI ONS
Watchman
Sonic Advanced/Plus
Ultrasonic liquid level monitoring
device for tanks up to 3m high
This product is to be used only on tanks within the
parameters outlined in the specifications. Any use
of the product on applications that lie outside these
specifications is done so at users own risk.
Read fully before installation and use
Check
level,
distance
Drill
Apply
and height
Tank
Base
A
A. Receiver B. Weather Seal C. Screws D. Watchman Sonic Advanced Transmitter
E. Watchman Sonic Advanced Base Parts C and E are not needed if unit is supplied with EcoSafe tank.
1. CHECK LEVEL, DISTANCE AND HEIGHT
Ensure before you start your install that the tank the Watchman
Sonic Advanced is to be fitted:
1. On a flat level base.
2. Within a 200 metre range from receiver position.
3. A maximum actual tank height of 3 metres.
50 metre effective range (200 metre clear line of sight).
4. Tank must be fitted in accordance with manufacturers
guidelines & instructions.
NB: Any radio frequency signal may be seriously inhibited if
positioned underground. Please check that the transmitter /
receiver link works in the desired location before installation.
2
®
Set
Measure
dip
Tank
switches
B
C
Pair
the
Fit
reciever
transmitter
Check
and
to the
the
transmitter
base
level
D
E
Pic 1
9-5415-03