Troubleshooting Tips - XtremeMac LUNA VOYAGER II Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
5. Press (+) to increase the volume or (-- ) to decrease the
volume. (5-20, default 10) Press 1 /2 once again to
confirm and exit alarm setting mode. The alarm icon will
light up in the display.
6. To cancel the alarm continue to press 1 /2 until the alarm
icon disappears.
Turning on and off an Alarm (at any mode):
Press 1/2 and the alarm settings will be displayed for 5
seconds.
Press 1/2 again to turn on/off corresponding alarm.
When an alarm is activated, the icon will light up and
appear on the display. Then when it is off the icon will
disappear.
Alarm Sounding:
Audio should ramp up to the volume setting in 5 seconds.
If the Alarm setting is iPod. Luna Voyager will check the
iPod for a Playlist called 'XtremeMac'. If the Playlist is
present, one of those songs will play randomly. If the
Playlist is not present, Luna Voyager will simply send the
iPod a Play command.
If the source is set to radio, select a radio station that you
would like to wake to otherwise the alarm will sound to the
last radio station played.
Note: If the alarm is set to iPod but no device is docked when
alarm is activated, the unit will default to chime.
When the alarm is sounding, press 1 /2 button to turn off
the alarm.
To use the snooze:
While the alarm is sounding, press SNOOZE/SOURCE
button. The Alarm icon 1 /2 will blink and "10" appears
8
in the display to show the snooze time for 5 seconds,
then it reverts back to the real time. The alarm turns on
automatically after 10 minutes.
PLAY YOUR MUSIC ON THE IPOD/ IPHONE/IPAD
1. Dock your iPod/iPhone/iPad to the unit.
2. Press SNOOZE/SOURCE to cycle to iPod source.
3. Press play on iPod to start playback if it does not come on
automatically.
4. Press (+) or (-- ) to adjust the volume to desired level.
When there is no iPod docked, the unit will enter stanby mode
automatically after 5 mins.
USING THE FM RADIO
Listen to the Radio
1. Press SNOOZE/SOURCE button to cycle to radio mode. For 1st
time usage, FM will be set to 87.5MHz. The radio station will
display for 10 senconds.
2. While the radio station is on the display the stations can be
adjusted using (+/-- ) (or press and hold (+/-- ) to auto tune to
the next strong station.
3. After 10 seconds the display will show the clock and Radio
icon. Stations will be remembered when the unit is switched
to standby mode and will resume when radio mode is selected
next time.
To view or adjust current radio station press SNOOZE/
SOURCE key once and the current frequency will display
for 3 seconds.
5. Press (+) or (-- ) to adjust the volume to desired level.
Listen to an External Audio Source
1. Press SNOOZE/SOURCE button to cycle to AUX mode. The
AUX icon appears in the display.
2. Connect a 3.5mm audio cable (available at xtrememac.
com) to the headphone or line out jack of an audio
device and plug in the other end into the AUX JACK on
the back of the unit.
3. Use the controls on your connected device to play back.
4. Press (+) or (-- ) to adjust the volume to desired level.
USING THE APP TO SET THE ALARMS
The Luna Voyager Clock app will allow you to enhance and
customize your waking experience. You can set your alarms
to specify snooze time, set volume ramping for the alarms
and, preset FM stations, manually tune FM stations and
much more.
1. Download the Luna Voyager II app from the iTunes App
Store to your iPod/iPhone/iPad model.
2. Launch the app and customize your alarm settings.
3. When all settings are complete, dock your iPod/iPhone/
iPad and press the sync button for each alarm you would
like to sync with the unit. The unit is now set with the
updated alarm times.

TROUBLESHOOTING TIPS

NO POWER
Check AC adapter connection
Connect the AC adapter into the jack in the back of Luna
labeled 12V and then plug the AC adapter into the wall
outlet.
Check wall outlet function
Plug another device into the same outlet to confirm the
outlet is working.
NO SOUND FROM SPEAKERS
Check audio source
Push the SNOOZE/SOURCE button to select the desired
audio source.
Check volume level
Press (+) to increase volume or (-- ) to decrease the volume
Check iPod connection
Remove your iPod from the dock and re-dock to make sure
it is properly connected.
If docking with device in a protective case, try removing it
and re docking
Check the iPod/iPhone/iPad
Try restarting your device and then re-docking to ensure a
proper connection.
POOR FM RECEPTION
Check FM antenna
Untie and extend the FM antenna on the back of the unit.
With the FM radio on, play with the positioning of the
antenna.
DISPLAY
Check dimmer settings
To check dimmer settings enter stanby mode.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido