Fault Treatment; When Indicators Light On The Control Board Is Out; The Indicator Light Is On, While The Printer Can't Work; Printer Driver - aqprox appPOS58MU Guia Del Usuario

IX. Fault treatment
When the printer appears faults, please fix them correspondingly referring to this
section. If it still can't work, please contact the distributor or manufacturer.

9.1 When indicators light on the control board is out

Check whether the power wire inserts the printer, power adaptor or power socket
correctly. Check whether the power switch is on or off.

9.2 The indicator light is on, while the printer can't work

Do the self-checking to check whether the printer can work normally. If not,
please contact the distributor or technical support.
If the self-checking can work, please check the following contents:
(3) Check the interfaces of printer and computer and also check whether the
connected line between them is to their specification requirement.
(4) The setting of data transmission between printer and computer may be different.
You know the printer's interface setting through the self-testing page. Please
contact the agent or technical support if the printer cannot print.
X. Printer driver
Driver is installed directly under Windows9x/7/8/10/ME/2000/XP/Linux/Mac.
(2) Install driver under Windows
Add printer in the Windows, and appoint the driver documents in the driver disk
to Windows. It can print once you start print command in the program. In this way,
Windows' printer driver turns characters to graphics dot-matrix for printing.