Weinmann VENTI-O2 Descripción Del Aparato Y Manual De Instrucciones página 5

1 VENTI-O
2
You can use VENTI-O
oxygen into the breathing mask during BiLevel
ventilation.
2 Therapy device
BiLevel ST home ventilation device (not supplied
with product); controls VENTI-O
power supply.
3 Creased tube
Part of the tube system. The respiratory air flows
from the therapy device to the breathing mask
through this tube.
4 Double tube
Part of the tube system. Consists of pressure
measurement tube and O
pressure measurement tube measures pressure in
the breathing mask to ensure that the therapy
device can provide the correct therapy pressures.
The O supply tube passes oxygen from VENTI-O
2
to the breathing tube.
5 O supply tube
2
Part of the double tube (see 4 Double tube)
6 O supply adapter system
2
Part of the tube system, comprises adapter sleeve,
transparent adapter and grey adapter; connects
the device outlet port of the therapy device to the
tube system. The adapter system diverts the O
supply tube out of the tube system and takes it to the
VENTI-O .
2
to supply up to 4 l/min
2
and provides its
2
supply tube. The
2
7 Tube sleeve
Part of the tube system, connects the creased tube
to the adapter system.
8 Sealing Plugs
Used to close off the ends of the pressure
measurement tube and the O
cleaning.
9 Testing tube
Used for function checking of the VENTI-O
10 O outlet
2
Used for connecting the O
11 Status indicator
Indicator is on continuously when the VENTI-O
supplying oxygen into the O
12 O inlet
2
Used to connect an oxygen system (concentrator,
liquid oxygen system, oxygen cylinder with
2
pressure reducer, central gas system).
13 Plug-in contact
For supplying energy to and controlling VENTI-O
14 Locking pins
Ensure that VENTI-O
housing of the therapy device.
2
supply tube during
2
supply tube.
2
supply tube.
2
is securely positioned on the
2
EN
Overview
.
2
is
2
.
2
5