CARE AND MAINTENANCE
All maintenance should be carried out by a qualified repair person.
• When servicing, use only identical replacement parts. Use of any other part could create a hazard
or cause product damage.
• To ensure that your child will not be injured accidentally, please frequently check and maintain the
kid car.
• Check whether the packaging contents are complete before assembling. If you find you are missing
packaging contents, please call 1-888-356-2258.
• Check whether screws are loose and parts are damaged when repairing.
• Please frequently check whether it is intact when installing or using every part.
• When disassembling, please follow the instructions carefully to avoid unnecessary damage.
• Please check the product and charger regularly. Check whether the wires, plugs, shells and other
parts are damaged. If they are damaged, stop using immediately until they are repaired properly.
• Before cleaning or performing any maintenance, remove the battery from the product.
• Use clean cloths to remove dirt, dust, oil, grease, etc. Use only a soft, dry cloth to clean the plastic
parts, never use detergent or alcohol.
• Be careful not to damage electronic components when cleaning the product. Do not rinse with
water. Wipe with a dry cloth.
TROUBLESHOOTING
If you still have questions or an unresolved issue after going through this troubleshooting guide, or
just want to speak to a Kobalt product expert, please call our Kobalt customer service department at
1-888-356-2258.
PROBLEM
The kid car does
not work.
POSSIBLE CAUSE
1. Low battery charge.
2. The kid car has stopped
working to protect
internal circuits.
CORRECTIVE ACTION
1. Charge the battery.
2. Turn off the kid car, wait for the tool
and battery to cool down, then
start the tool again.
22