Publicidad
Idiomas disponibles
Idiomas disponibles
1. Door Prep
1/8" Deep
21/4"
1"
2. Standard Strike Plate Door Jamb Prep
1/8" DEEP
13/16" DEEP
Door Thickness (A)
A
B
C
1.250
DRILL 1/8"
1.125
PILOT HOLES
3. Install Strike Plate
Fasten Strike Plate using two #8 x 3/4" wood screws.
2
23/8" or 23/4"
Backset
21/8" Diameter
Bore
1" Diameter Edge Bore
A
B
13/8"
11/4"
11/2"
15/16"
13/4"
17/16"
NOTE: Dimensions B & C
should be used as reference
only. Due to tolerances
actual door jamb prep
dimensions will vary. Using
the strike plate
outline edges and
locate screw holes
on strike with center
line on jamb.
4. Install Latch
Step 4A: Place Plastic Alignment tool in bore hole.
Step 4B: Insert the latch through the alignment tool.
C
21/4"
21/4"
21/4"
!
Rotate the nose bolt so that the curved face
will hit the strike plate when closing the door.
Step 4C: Fasten Latch using two #8 x 3/4" wood screws.
Alignment Tool
Privacy Function: the
threaded hole for the
privacy pin must be
facing the interior side
of the door.
Publicidad
