Emtek CF 2.0 Guia De Instalacion página 3

5. Install CF Cassettes
Step 5A: Install spindle and CF Cassette A as shown, place the Cassette with the arrow pointing to the door edge.
For levers, install the cassettes on the correct side, so that the rotation arrow indicates a downward lever actuation.
Step 5B: Place the CF Cassette B with the arrow pointing to the door edge. Fasten it with (2) machine screws.
Check the trim alignment before fully tightening the screws.
For Privacy Function ensure the
!
hole in the Cassette aligns with the
privacy pin hole in the Latch.
6. Install the Rosettes
Step 6A: Place the rosette.
For privacy function, ensure the privacy pin hole
!
in the rosette is on the side closest to the door
edge and aligns with the hole in the Cassette
!
Spring
Step 6B: Secure the rosette to the door using the Ring
Fastener Wrench.
For levers only: Remove the rotation card
after installation of Cassette.
!
3