Disconnecting Battery From Power Tool - GreenWorks GL 900 Manual Del Propietário

OPERATION
Insert adapter
Insert the adapter (1) in the power tool – the adapter slides into the compartment – press it down
carefully until it snaps into position. The battery and power tool are now connected together.
For further information on switching on and operating the power tool: see the instruction manual
of the power tool being operated with this battery.

DISCONNECTING BATTERY FROM POWER TOOL

Switch off the power tool – see also instruction manual of the power tool being used.
• Depress locking levers (1) to unlock the adapter.
• Take the adapter (2) out of the power tool.
The battery and power tool are now disconnected.
2
1
14