Symptom
Remote does not turn on.
Remote will not pair
Remote is paired but does not
respond
Diagnosis
Basic
No battery
Battery is dead
Battery was installed backwards
Bluetooth
Remote is not showing up in bluetooth
list
Device being paired to is not in pairing
mode
Remote is already paired to another
device
Remote went to sleep
Remote is out of range of device
Connection was lost
6
Troubleshooting
Remedy
Insert battery (1 X CR2032) into unit.
Remove old battery from unit and replace with new CR2032.
Remove battery and reinstall with the + side of the battery
facing the same direction as the + symbol on the tray
Press any button to wake unit up. Turn device bluetooth off
then back on
Turn bluetooth off then back on Make sure device is in
searching mode
Unpair remote from original device. Delete/forget device
from bluetooth history list. Hold track up button for more
than 10 seconds. Pair remote to new device
Press any button on remote to wake up
Move remote/device within range of one another (10m).
Unpair device from remote, Toggle bluetooth off then back
on. Re-pair to remote