Important Safety Instructions - Total TAT20751 Instrucciones De Uso

Read this Operation Instruction carefully and understand it comple tely, basic precaution should be
strictly followed to prevent the damage to the tool and injury to the operator. Retain this manual for further
reference.

Important Safety Instructions

1.For toxic vapors produced by spraying certain materials can create intoxication and
serious damage to health. Always wear protective eyewear, gloves and respirator to prevent
the toxic vapor hazard, solvent and pointing paint coming into contact with your eyes or skin.
(see fig 1)
2.Never use oxygen, combustible or any other bottle gas as a power source or would
cause explosion and serious personal injury. (see fig 2)
3.Fluid and solvent can be highly flammable or combustible. Use in well-ventilated spray
booth and avoid any ignition sources, such as smoking, open flames and decrial hazard. (see
fig 3)
4.Disconnect tool from air supply hose before doing tool maintenance and during
non-operation, for emerge stop and prevention of unintended operation, a ball valve near the
gun to air supply is recommend.
5.Never use homogenate hydrocarbon solvent, which can chemically react with aluminum and
zinc parts and chemically compatible with aluminum and zinc pats.
6.Never point gun at you and others at any time.
7.Before operating the tool, make sure all the screws & caps are securely tightened in case of
leaking;
8. Before painting, make inspection for free movement of trigger and nozzle to insure tool can
operate well.
9. Never modify this tool for any applications. Only use parts, nozzles and accessories recommended and accessories
recommended by manufactures.
10. If need to understand the formed materials of spray gun in detail, please contact manufacturer directly.
Fig 1.
Fig 2.
Fig 3.
Fig 4.