Forch 6710 0867 Manual De Instrucciones página 21

2. Screw the adapter onto the bottle containing the cleaning fluid. The device may only be
operated with FÖRCH R584 misting fluid. FÖRCH will accept no responsibility for damage
caused by the use of unapproved chemical products.
3. Place the bottle in the opening upside down.
Instructions
Clean the vehicle interior and remove the foot mats.
If the cabin filter is installed in the cockpit interior, remove it.
If the cabin filter is installed in the engine compartment, it does not need to be removed.
The cabin filter should always be replaced after cleaning!
Start the engine and place the ultrasonic misting device on the vehicle floor on the passen-
ger side. Place the outlet as close as possible to the air circulation opening,
which is located in the lower area of the passenger footwell. Set the temperature of the air
conditioning to 22 °C and change the setting to front ventilation.
Select the internal air circulation mode.