Installation - Glacier bay HD67763W-5091 Guia Del Usuario

Installation

1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Remove the preassembled lock nut (C) and
washer (B) from the new faucet (A).
□
Place the faucet (A) through the mounting holes
in the sink until the faucet (A) sets on top of the
sink.
□
Secure the faucet (A) to the sink using the
washer (B) and lock nut (C) provided.
NOTE: Ensure the washer (B) and hoses (1) are no
interference.
1
B
C
A
1
C
2
2
Preparing the pop-up assembly
□
Remove the bottom gasket (F) and nut (G) from
the top gasket (D) and pop-up body (E).
□
Attach these pieces together by pushing the
bottom gasket (F) down into the top of the
nut (G) and twisting together.
4
D
E
F
G