Glacier bay HD67763W-5091 Guia Del Usuario página 5

Installation (continued)
3
Installing the pop-up body
□
Insert the pop-up body (E) into the sink. Ensure
that the top gasket (D) rests securely between
the top of the sink and the top of the pop-up
body (E).
5
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
□
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
4
□
D
E
5
Please contact 1-855-HD-GLACIER for further assistance.
Securing the pop-up body
From underneath the sink, screw the bottom
gasket (F) and nut (G) assembly onto the pop-up
body (E) by twisting clockwise until secure.
1
2
E
F
G
HOMEDEPOT.COM