AOSmith AO-US-RO-4000 Manual Del Propietário página 12

STEP 7 Filter Installation
Before you begin
Ensure COLD water valve is shut off and there is no water pressure in the system.
Carbon and Claryum
1. Attach Stage 1 Carbon filter sump (B) to left (INLET) side of system manifold. Ensure all
connection points are aligned and push sump up into system manifold. Turn sump all
the way to the right until it stops.
Repeat this step for Stage 2 RO Membrane (C) and Stage 3 Claryum
Stage 1
filter cartridges will come pre-installed in their cartridge sumps.
®
Stage 1
Stage 2
NEED HELP? GIVE US A CALL 877.333.7108
INSTALLATION GUIDE
filter sump (D).
®
Stage 3
9