Installation Guide - AOSmith AO-US-RO-4000 Manual Del Propietário

INSTALLATION GUIDE

2
Tools recommended for installation:
• Tape Measure
• Utility Knife
• Phillips Head Screwdriver
• ⁄ " & ⁄ " Drill Bits/Drill
1 7
8 32
• Adjustable Wrench
Note: We recommend using an approved or certified professional if drilling is required.
Basic plumbing knowledge is recommended prior to installing this unit.
Prepare Site and Plan for Installation
Read the entire manual to familiarize
yourself with the system and determine
the best location for installation. Check
and comply with all local plumbing codes.
16"
(40.6 cm)
(27.9 cm)
Note: If you have metal drain pipes, consult a plumber for installation of drain connection.
NEED HELP? GIVE US A CALL 877.333.7108
11"
WARNING: We recommend using an approved or certified professional.
Proper installation is the responsibility of the installer. Product failure due
to improper installation is not covered under the warranty.
• Bleach
• Safety Glasses
• Pencil
• Masking Tape
• Pan or Bucket
1. Prior to installation, turn off the cold
water shut-off valve under the sink.
2. Temporarily place system and tank into the
sink cabinet (or desired location) to ensure
adequate space and proper positioning.
Remove system and tank from under
your sink to begin installation.
12"
(30.5 cm)
6"
(15.2 cm)