Setup Information; Step 1: Install The Print Server; Step 2: Attach A Network Cable - Lexmark MarkNet N2000 Serie Referencia Rápida

Setup information

Step 1: Install the
print server
Step 2: Attach a
network cable
Note:
The print server inside
the printer automatically adjusts
itself for the network speed.
™
Install the Lexmark
option card slot inside your printer.
If you need help, refer to the Setup Guide that shipped with your
printer for instructions about accessing the printer system board,
installing option cards, and reinstalling the printer system board.
Copies of your printer publications are available on Lexmark's Web
site at www.lexmark.com.
Attach the printer to your network using an Ethernet or Token-Ring
network cable.
1
Make sure the printer is turned off and unplugged.
2
Connect the printer to a LAN drop or hub. Use network cabling
that is compatible with your network and your print server.
See the following illustrations for information about ports and
cables.
Important: Use only one network port on the MarkNet card even if
multiple ports are available.
2
™
MarkNet internal print server in an open