Seam Openings; Troubleshooting - Stearns Back Country B801 Manual Del Proprietário

7.3 Seam Openings

Seam openings are difficult to repair but can be done with certain seam
repair adhesives. Contact STEARNS
local marine shop.

8. TROUBLESHOOTING

This chart will help you find and correct minor problems with your
canoe.
Problem
Slow leak.
Still leaks slowly.
Air valves don't align.
Doesn't inflate
completely.
The zipper is stuck.
Difficulty draining water. Wipe off excess water with a high
for more information or ask your
®
Check valve gaskets and make sure the
cap tether is not interfering with the seal.
The valve gaskets must be closed tightly.
Check for pinholes. Read section
"Repairing Pinholes."
Let air out of both chambers to allow you
to shift the inner tube to match up with the
valve holes in the cover.
Make sure that the tube is aligned.
Read "Care and Maintenance" section
(6.3) regarding zippers.
absorbing sponge or towel. The canoe
dries much quicker inflated, and in a well
ventilated area. Do not expose in direct
sunlight to dry. Deflate canoe and briefly
hang it from the molded handles with seats
removed and seating compartment exposed.
To avoid mold, do not pack or fold while
boat is damp or wet.
15
Solution