Battery Installation; Basic Operation - Aiwa BBTC-550MG Manual De Usuario

8
en
DESCRIPTION OF THE DISPLAY
LCD DISPLAY VIEW
USB CD MP3 BT TAPE AUX ST
REPEAT 1
USB MODE INDICATOR
CD MODE INDICATOR
CD-MP3 MODE INDICATOR
BLUETOOTH MODE INDICATOR
TAPE MODE INDICATOR
AUXILIARY INPUT MODE INDICATOR
CONNECTIONS
MAINS CONNECTION
Check if the power voltage shown on the
1.
rating label located on the back of the
set, corresponds to your local AC power
supply.
2. Connect the power cord to the wall outlet.
Notes:
• Unplug the power cord from the wall
outlet to protect your set during heavy
thunderstorms.
• The power cord is used as a disconnection
device, the cord shall remain always readily
accessible.
FM
MHz
FM STEREO FUNCTION INDICATOR
PLAYING INDICATOR
REPEAT FUNCTION INDICATOR
PLAYBACK TIME / MODE / HOUR
MHz AND FM RADIO MODE INDICATOR

BATTERY INSTALLATION

Batteries must be inserted correctly to avoid damage to the boombox. Always remove the batteries
when the apparatus is not going to be used for a long period of time as this may cause leakage of the
batteries and subsequently damage to your device.
BATTERY INSTALLATION
Slide out the battery compartment cover located at the bottom of the unit and insert
6 LR14/UM-2/C TYPE batteries (not included) according to the polarity shown in the battery
compartment.
Notes:
• Always detach the power cord from the wall outlet if the boombox is going to be operated
with batteries.

BASIC OPERATION

POWER ON & STANDBY MODE
1. Once the boombox has been connected to
a wall outlet, or charged with batteries,
turn on the main power by briefly pressing
the /MODE button, The LCD display
will turn on showing the current playback
mode.
2. Press the /MODE button on the front of
the unit, to initiate the function modes.
3. To put the boombox on standby mode,
just press and hold the /MODE button
for 2 secs and the display will turn off.
Note:
• When turning on the unit, the display
will show the last playback mode that
was used.
POWER OFF
To turn off the boombox completely it has to
be done from a standby position.
Then you can unplug the device from the
wall outlet or remove the batteries safely.
MODE BUTTON
Press the /MODE button repeatedly
to switch among bt (Bluetooth) / AUX
(Auxiliary input) / rd (Radio) / tAP (Tape)
/ Cd (CD) / USb (USB).
VOLUME LEVEL
Turn the VOLUME KNOB on the top left
panel to adjust the volume level.
REPEAT
Press repeatedly the REPEAT button on
the front panel to scroll through the
following repeating settings: One-All-OFF.
9