Speakers And Stands - Steren BAF-510 Manual De Instrucciones

3. INSTRUCTIONS

3.3 Speakers and stands

Connect speaker wires to the inlets
located at the head of each of the
speakers.
The other end connect to the left
(Left) and right (Right) outputs on
the mixer. Position the cables so
that they are not an obstacle for the
people.
Only connect the speakers supplied with the equipment to the mixer.
Extend the tripods of the speakers and press the corresponding
insurance. Extend the base tube and place it to the height that you
want, press the corresponding insurance in order to avoid this tube
to change position.
Place the brackets on a flat surface where you want to install the
speakers. Insert the speakers on tripods, use base hole located
at the bottom of the speaker. Note that if the front speakers are
placed in front of microphones, will increase the possibility of
feedback.
11 11