Acoustic Research ARVS10 Guia De Inicio Rapido página 4

Bluetooth wireless connection tips
• Make sure the Bluetooth capability of your device is turned on.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This
range may vary, however, based on other factors, such as room layout, wall material, obstacles,
your device's Bluetooth performance, etc. If you're having problems connecting to the hub, move
closer to it.
• If your device asks you for a password to connect, use "0000".
If you're having trouble reconnecting, try the following solutions:
• Find the device named AR Conference Hub in the Bluetooth menu on your phone, and remove (or
forget) this device. Then start the pairing process described in this section again to re-pair and connect.
• With the hub turned on, press and hold the + and – buttons on the front panel for 3 seconds until
the hub gives an audio signal. This resets the hub. Then, remove "AR Conference Hub" from your
phone's Bluetooth devices and repeat the pairing process.
4. Start playing music on your device
To make sure your device is connected, set its volume for music
to 75%. Then start playing music or other audio on your device.
Within seconds, the hub starts streaming the audio wirelessly via
Bluetooth.
To adjust the volume of your audio: Press the
the hub, or use the volume controls on your phone.
TIP: If you're playing music via Bluetooth, a quick single-press on the speaker's
will pause/play.
4
and buttons on
button