Blaupunkt DuoCam VIO-BX20 Guia De Inicio Rapido página 10

Step 6:
• Place the camera on the installation surface.
Step 7:
• Take out the installation screws. Tighten the screws to fix the device onto the
installation surface.
1
1
1. Camera
2
2. Adjustment screw
3
2. Self-tapping Screw
Step 8:
• Connect the Camera Power connector to the included power supply cable. Then
connect the power supply cable to the power line socket. Optional: If you want to
install your camera via Ethernet cable, connect your camera to the router using an
Ethernet cable.
Step 9:
• Use the cross screwdriver to loosen the "Adjusting Screw".
Step 10:
• Adjust the device in all possible directions, and set it to the desired monitoring area.
10
2
3
4
4
3. Plastic anchors
5
4. Mounting Surface
5