Promise Technology FASTTRAK SX4300 Guia De Inicio Rapido página 11

Drivers and installation instructions for other Operating Systems are
downloadable from the Promise website at www.promise.com.
Step 6: Install WebPAM
Windows
Follow these steps to install WebPAM on your Windows-based PC or
Server.
1. Boot up the PC/server and launch Windows.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. Double-click on the Install CD's icon to open it.
4. Double-click on the Installer icon to launch it (right).
The first WebPAM installation dialog box appears.
5. Follow the prompts in the installation dialog box.
Linux
Follow these steps to install WebPAM on your Linux-based PC or Server.
1. Boot up the PC/server and launch the Linux GUI.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. In the CD window, double-click on the webpam...bin icon to
begin installation (right).
4. When the Run or Display? dialog box appears, click Run in
Terminal .
After several moments, the Terminal window closes and the first WebPAM
installation dialog box appears.
5. Follow the prompts in the installation dialog box.
A complete set of installation instructions is found in Chapter 2 of
the WebPAM User Manual on the software CD.
Note
11
Step 6: Install WebPAM