Promise Technology FASTTRAK SX4300 Guia De Inicio Rapido página 4

FastTrak SX4300, SX8300 Quick Start Guide
If any of the items are missing or appear damaged, please contact your dealer or
distributor immediately.
Step 2: Install the FastTrak Card
The FastTrak RAID Controller card fits into any available 3.3-volt PCI-X slot. You
cannot plug the FastTrak card into a 5-volt PCI slot.
1. Remove the cover of your system.
2. Remove the inside slot cover of an available PCI-X slot on the motherboard.
The electronic components on the FastTrak RAID Controller card
are sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
FastTrak card or its subassemblies.
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.
The FastTrak SX4300 and SX8300 RAID Controller cards are PCI
Plug-n-Play (PnP) devices. No changes are necessary in the
motherboard CMOS/BIOS Setup for resources or drive types in
most applications.
Warning
Warning
Note
4