Ryobi OGS1820 Manual Del Usuario página 14

GB
F D E
power tools with your fi nger on the switch or energizing
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
■
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance at
■
all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery.
■
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
■
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool
■
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn
■
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect t he plug from the power source and/or the
■
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of children and
■
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding
■
of moving parts, breakage of parts and any other
condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
■
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
■
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
I P NL S DK N FIN GR HU CZ RU
English
BATTERY TOOL USE AND CARE
Recharge only with the charger specifi ed by the
■
manufacturer. A charger that is suitable for tone type
of battery pack may create a risk of fi re when used with
another battery pack.
Use power tools only with specifi cally designated battery
■
packs. Use of any other battery packs may create a risk
of injury and fi re.
When battery pack is not in use, keep it away from
■
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fi re.
Under abusive conditions, liquid may be ejected from
■
the battery; avoid contact. If contact accidentally occurs,
fl ush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
SERVICE
Have your power tool serviced by a qualifi ed repair
■
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
READ ALL INSTRUCTIONS BEFORE OPERATING
Read the instructions carefully. Be familiar with the
■
controls and proper use of the unit.
Do not operate this unit when tired, ill, or under the
■
infl uence of alcohol, drugs, or medication.
Inspect the unit before use. Replace damaged parts.
■
Check for battery pack leaks.
Do not operate this unit in explosive atmospheres,
■
such as in the presence of fl ammable liquids, gases or
dust.
Make sure all fasteners and guards are in place and
■
secure. Replace cutting blades or any other parts that
are cracked, chipped, or damaged. Make sure the cutting
blade is properly installed and securely fastened. Failure
to do so can result in personal injury to the operator and
bystanders, as well as damage to the unit.
Use the right tool. Only use this grass shear / shrubber
■
for the purpose intended.
Do not use grass shear / shrubber if switch will not turn
■
the unit on or off. A unit that cannot be controlled with
the switch is dangerous and must be repaired.
Clear the area to be cut before each use. Remove all
■
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade.
9
RO PL SLO HR TR EST LT LV SK BG