Pride Mid-size Serie Manual Del Usuario página 28

V . C O M F O R T A D J U S T M E N T S
Armrest Angle Adjustment
Armrest angle of your scooter can be adjusted upwards or
downwards by turning the adjustment dial. See figure 16.
NOTE: The armrests also pivot upward to make getting
on and off of your scooter easier.
Accessory Bracket
The rear-mounted accessory bracket allows you to attach a
personal accessory such as a basket, walker holder, or any
item to the back of your scooter. Utilize the detent pin to
securely mount your item to the accessory bracket. See
figure 16. See your authorized dealer for details.
Seat Height Adjustment
The seat can be repositioned to several different heights.
See figure 17.
1. Remove the seat and/or shroud from your scooter. See
VI. "Disassembly and Assembly."
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the desired seat
height.
4. While holding the upper seat post at that height, align
the adjustment holes of the upper and lower seat posts.
5. Insert the seat height adjustment bolt through the
locating holes of both the upper and lower seat posts.
6. Reinstall the nut onto the seat height adjustment bolt
and tighten.
7. Reinstall the shroud and the seat.
28
IDENTIFICATION KEY
1. UPPER SEAT POST
2. NUT
3. SEAT HEIGHT ADJUSTMENT BOLT
4. LOWER SEAT POST
1
3
4
Figure 17. Seat Height Adjustment
Mid-size Scooter Series
2