Data Management; Storing A Measurement Result; Viewing The Data Log; Deleting The Data Log - LABBOX Metria M10 Manual De Instrucciones

Data Management

The METRIA M10 portable turbidity meter is capable of storing and recalling up to 100 data sets.

Storing a measurement result

In the measurement process, press the MI key to store the reading into the memory, the Memory icon appears on the display.

Viewing the data log

1. Press the MR key in the measurement mode, the meter shows the serial number of stored data (e.g. LOC/1).
Press the ► key, the display shows the date and time of measurement (Format: mm-dd, hh-mm).
2.
Press the ► key, the display shows the stored data.
3.
Press the ► key again, the display shows the next data set.
4.
5. Press the Meas key, the meter returns to the measurement mode.

Deleting the data log

If the memory is full, the meter will automatically show
steps below.
1. Press and hold the
Press the ◄ key until the display shows
2.
3. Press the Enter key, the display shows
Press the ◄ key to select the
4.
5. Press the Enter key to confirm.
key for 3 seconds to enter the setup menu.
/
/ .
/ .
when the MI key is pressed. To delete data logs, please follow the
.