Tabla de contenido
Publicidad
1. Power on the device by connecting the USB cable to your computer.
2. Allow the modem to boot up. This might take up to 30 seconds.
3.
Install the correct drivers according to the system you are using. You can download the drivers by following
DRIVER DOWNLOAD link below.
4. After you have installed the drivers, visit our configuration information page by following CONFIGURATION link.
5. For advanced users you can find all the information about AT commands by following AT COMMANDS link.
DRIVER DOWNLOAD
https://wiki.teltonika.lt/view/TRM240_Downloads
CONFIGURATION
https://wiki.teltonika.lt/view/TRM240_Configuration_Examples
AT COMMANDS
https://wiki.teltonika.lt/view/TRM240_AT_Commands
RF technologies
Max RF power
Mobile antenna
*Order code dependent.
**Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
DEVICE CONFIGURATION
TECHNICAL INFORMATION
Radio specifications
2G, 3G, 4G (LTE Cat1)
33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE
Bundled accessories specifications*
698~960/1710~2690 MHz, 50 Ω, VSWR<3, gain** 3 dBi, omnidirectional, SMA male connector
Publicidad
Tabla de contenido
