How To Use This Radio; Power On Radio; Automatic Power On; Channel Control - SuperStar CRT MIKE Manual Del Usuario

HOW TO USE THIS RADIO

Power on radio

1. Press
key to turn on the radio.
Note : When the radio on, hold
key, the radio will power off.
2. Adjust squelch level until you can hear background noise, refer to Page 7 about
Squelch level setup.
3. Adjust volume level to wanted level, refer to Page 7 about Volume level setup.

Automatic Power on

1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatedly short press
POR: XXX
4. Press or
5. Short press any other key to confirm and exit.
Repeat the above operation will turn off Automatic power on.

Channel control

1. Short Press
Channel.
2. Hold or
Note: Before using, check if the working frequency and Norms are valid in your country. If
not, change the norms according to following instruction. The radio is defaulted set on
EUH (AM/FM 4W). The norms list see page 12.

Choose Norms

1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatly short press
BAND: XXX
4. Press or
5. Short press any other key to confirm and exit.
key until nothing appears on LCD and release
key until LCD displays
to choose POR: ON.
or key to choose
key to choose channel fastly.
key until LCD displays
to choose the norms
DN POW UP
6