Mopedia PO300M Manual De Instrucciones página 36

12
Table 2
THE LIFTING ARMCHAIR IS INTENDED TO FUNCTION IN THE FOLLOWING ELECTROMAGNETIC
CONDITIONS. THE CLIENT OR USER MUST ENSURE THAT IT IS USED IN THESE CONDITIONS.
IMMUNITY TESTS
ELECTROSTATIC
DISCHARGE (ESD)
EN 61000-4-2
FAST TRANSIENTS
AND BURSTS
EN61000-4-4
IMPULSE VOLTAGES
EN 61000-4-5
VOLTAGE DROP OUTS,
BRIEF INTERRUPTIONS
AND VARIATIONS
OF VOLTAGE ON THE
POWER SUPPLY LINES.
EN 61000-4-11
CONDUCTED RF
EMISSIONS EN55011
RADIATED RF
EMISSIONS EN55011
MANUFACTURER'S GUIDE AND DECLARATION
TEST LEVEL IEC 60601
± 4 KV CONTACT
± 8 KV AIR
1KV – 5KHZ INDIVIDUAL
COUPLING, 2000V - 5KHZ
PARALLEL COUPLING
2KV PARALLEL
COUPLING;
1KV INDIVIDUAL
COUPLING
0V/2000MS;
0V/500MS; 0V/50MS;
0V/20MS; 0V/500MS;
0.75V/2000MS;
0.75V/500MS; 0V/50MS;
0.15 ÷ 0.5 MHZ
79 DBΜV
0.5 ÷ 30 MHZ
73 DBΜV
CLASS B
30 – 230 MHZ, 40 (3 M)
230 – 1000 MHZ, 47 (3 M)
CLASS A
30 – 230 MHZ, 50 (3 M)
230 – 1000 MHZ, 57 (3 M)
CONFORMITY LEVEL
± 4 KV CONTACT
± 8 KV AIR
1KV – 5KHZ INDIVIDUAL
COUPLING, 2000V - 5KHZ
PARALLEL COUPLING
2KV PARALLEL
COUPLING;
1KV INDIVIDUAL
COUPLING
0V/2000MS;
0V/500MS; 0V/50MS;
0V/20MS; 0V/500MS;
0.75V/2000MS;
0.75V/500MS; 0V/50MS;
0.15 ÷ 0.5 MHZ
79 DBΜV
0.5 ÷ 30 MHZ
73 DBΜV
CLASS B
30 – 230 MHZ, 40 (3 M)
230 – 1000 MHZ, 47 (3 M)
CLASS A
30 – 230 MHZ, 50 (3 M)
230 – 1000 MHZ, 57 (3 M)
ELECTROMAGNETIC
ENVIRONMENT – GUIDE
INFORMATION FOR
USE OF THE DEVICE.
THE FLOOR MUST BE
WOOD, CONCRETE OR
CERAMIC. IF THE FLOOR
IS COVERED WITH A
SYNTHETIC MATERIAL,
THE RELATIVE HUMIDITY
MUST BE AT LEAST 30%.
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY.
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY.
THE QUALITY OF THE
MAINS VOLTAGE MUST
BE THAT OF A TYPICAL
BUSINESS ENVIRONMENT
OR HOSPITAL WHEN
CHARGING THE BATTERY.