PUREGEAR PUREJUICE 10K Manual Del Usuario página 4

Instructions:
To charge the PureJuice 10K using a WALL CHARGER,
CAR CHARGER or COMPUTER:
1. Use the provided USB-A to
Micro-USB cable and insert
the Micro plug into the port
on the battery as shown.
2. Plug the USB-A into your
existing wall charger, car
charger or computer. The
status indicator lights will flash
to show charging has begun.
When battery is fully charged,
the lights will stop flashing.
6
To charge your device:
1. For Lightning devices: Insert
the Lightning plug into the
Lightning port on your device.
For USB-C devices: Ensure the USB-A
plug is tightly pushed into the port on
your charger. Now, plug the USB-C
plug into the USB-C port on your device.
NOTE: The USB-A to USB-C cable can also be used
with other devices. For example, you can charge your
phone using your computer.
Provides up to 3 charges.
Charging Indicator
Light Status:
4 lights = full battery
3 lights = 3/4 battery remaining
2 lights = 1/2 battery remaining
1 light = 1/4 battery remaining
7