Usage Tips
• Unless otherwise specified by the recipe, first add liquid into the mixing Cup.
• The fruit (removal of nuclear and other hard objects) and vegetables are cut into blocks, the size is not more
than 10 x 10 mm.
• Do not use the blender overload work, if the motor stops rotating, please immediately turn off the blender,
unplug the power let it cool at least 20-30 minutes, and then from the new start operation;
• This blender is not available for mixing thick flour or stirring meat.
3. Blending the ingredients the mixing Cup and
mixing knife block Assembly tighten. (FIG.3/4)
4. Parameter check power supply, connect the main
power after power on, align the mixing Cup mixer
interface, press the mixing Cup then tighten clock-
wise to fix. (FIG.5)
5. Work for not more than 1 minute.
6. After working please pull the plug, and then un-
screw the mixing Cup component, then remove
the mixing knife, the drinks poured out or cover lid
easy to carry on drinking. (Note: after use, please
clean up mixing Cup)
8